Skip to content
Civic Tobacco Machinery

Blog

HLP-180 vs HLP-200 vs HLP-225: Which HLP Cigarette Packing Machine Fits Your Line?

Kashif Ali5 min read
HLP-180 vs HLP-200 vs HLP-225: Which HLP Cigarette Packing Machine Fits Your Line?

HLP-180 vs HLP-200 vs HLP-225 compared: speed, plunger type, pack formats and which HLP cigarette packing machine matches your cigarette maker.

The short answer: the HLP-180 packs 180 packs per minute with a single plunger, while the HLP-200 and HLP-225 use a double plunger to reach 200 and 225 packs per minute. All three produce hard packs in the same sizes and pack styles. The right HLP cigarette packing machine is the one whose speed matches your cigarette maker, with some headroom to spare.

This comparison sets out the specifications side by side, explains the single versus double plunger difference, and shows which packer pairs with each common cigarette maker.

HLP-180 vs HLP-200 vs HLP-225 at a Glance

SpecificationHLP-180HLP-200HLP-225
Speed180 packs/min200 packs/min225 packs/min
Cigarettes per minute (20 per pack)3,6004,0004,500
Plunger typeSingle plungerDouble plungerDouble plunger
Control systemPLCPLCPLC
Cigarette sizesKing / Demi / Slims / Super slims / NanoKing / Demi / Slims / Super slims / NanoKing / Demi / Slims / Super slims / Nano
Pack stylesRound corner, bevel edge, D-type, squareRound corner, bevel edge, D-type, squareRound corner, bevel edge, D-type, square
Product pageHLP-180HLP-200HLP-225

Cigarettes per minute assumes the standard 20 cigarettes per pack. Specifications are taken from our product pages.

What All Three HLP Packers Have in Common

The three machines share the same core design, so the choice is mostly about speed, not capability. Each one:

  • Produces hard packs (for soft packs, see the SASIB range below)
  • Runs on a PLC control system
  • Handles king size, demi, slims, super slims and nano cigarettes
  • Offers round corner, bevel edge, D-type and square pack styles

That means a factory can start on one HLP model and add or upgrade to another without changing its pack design.

Single Plunger vs Double Plunger

In a hard pack machine, the plunger pushes the cigarettes into the pack shell. The HLP-180 does this with a single plunger. The HLP-200 and HLP-225 use a double plunger system, which pushes the cigarettes into the pack shell from two coordinated points rather than one.

This matters at higher speeds. A single-plunger design can struggle to keep pack density and alignment consistent once output climbs past a certain point. The double plunger design is part of what lets the HLP-200 and HLP-225 hold their rated speed without a rise in rejected or poorly formed packs.

At 180 packs per minute, the single-plunger HLP-180 still runs steady, efficient packing cycles with consistent alignment, wrapping and sealing on every pack, which makes it a dependable choice for high-volume hard pack production for local and export markets.

Match the Packer to Your Cigarette Maker

The most common mistake on a cigarette line is a packer slower than the maker. Every cigarette the maker produces must be packed, so the packer's capacity in cigarettes per minute should be higher than the maker's output. The table below matches each maker in our cigarette making machine range to an HLP packer.

Cigarette makerMaker output (cigarettes/min)Suggested HLP packerWhy
Mark 8 Post 641,800 – 2,000HLP-180Ample headroom; packer runs well below its limit
Mark 8D MAX 153,000HLP-180 or HLP-200HLP-180 gives 20% headroom; HLP-200 gives more
Mark 9.5 Lenze3,500HLP-200HLP-180 (3,600) leaves almost no headroom
MK-9 / Mark 9.5 Max S4,500 – 5,000HLP-225 or two packersAt 5,000/min, one HLP-225 (4,500) is not enough
Protos 707,000Two HLP-200Two packers give 8,000/min capacity
Protos 80 ER8,000Two HLP-225Two HLP-200 would have no headroom; two HLP-225 give 9,000/min

As a rule, aim for at least 10–20% more packing capacity than your maker's output. Machines rarely run every minute at their rated speed, and headroom lets the packer catch up after short stops.

If you are still choosing the maker, our guide on choosing the right cigarette making machine and the Mark 8 Post 64 vs Mark 8D MAX 15 comparison cover that decision.

When to Choose Each Model

Choose the HLP-180 if

  • You run a Mark 8 Post 64 or Mark 8D maker
  • You are starting a new factory and want the simpler single-plunger design
  • Your output target is moderate and you want room to grow on the maker side first

Choose the HLP-200 if

  • You run a Mark 9.5 with Lenze drives, or want extra headroom behind a Mark 8D
  • You plan to pair two packers behind a high-speed Protos 70
  • You need flexible 220V / 380V power options, as listed for this model

Choose the HLP-225 if

  • You run a MK-9 or Mark 9.5 Max S near the 4,500 mark
  • You want the highest single-packer output in the HLP range
  • You are planning two packers behind a Protos 80 ER

What Comes After the Packer

A packed hard pack still needs overwrapping and cartoning. The Regular Wrapper CP1 overwraps up to 250 packs per minute, so one CP1 can follow any of the three HLP packers. For the difference between pack-level and carton-level wrapping, read our CP1 vs Naked Over Wrapper comparison.

If your market prefers soft packs, the HLP range is not the right fit. Our guide to soft pack packaging explains the alternative.

Budgeting for a Packer

The packer is usually the second-largest machine cost on the line after the maker. For a price on a full line, including the costs buyers often forget, contact our team.

Whichever model you choose, every reconditioned HLP packer from Civic Tobacco Machinery is inspected, serviced and tested before it leaves us, and our own team sets up the packing line on your factory floor, tested and ready to run.

Frequently Asked Questions

What is the difference between HLP-180, HLP-200 and HLP-225?

Speed and plunger type. The HLP-180 packs 180 packs per minute with a single plunger. The HLP-200 and HLP-225 use a double plunger and pack 200 and 225 packs per minute. Sizes and pack styles are the same on all three.

Which HLP packer do I need for a Mark 8 maker?

An HLP-180 covers both the Mark 8 Post 64 (up to 2,000 cigarettes per minute) and the Mark 8D MAX 15 (3,000 per minute). An HLP-200 adds more headroom behind the Mark 8D.

Can HLP machines pack slim and nano cigarettes?

Yes. All three handle king size, demi, slims, super slims and nano formats with the right change parts.

Do HLP machines make soft packs?

No. HLP machines produce hard packs. For soft packs, SASIB 3000 and SASIB 5000 machines are used.

Find the Right HLP Cigarette Packing Machine

Civic Tobacco Machinery, a cigarette machinery supplier in Pakistan since 1990, supplies reconditioned HLP-180, HLP-200 and HLP-225 packers, matched to your maker and installed at your factory. See the full cigarette packing machine range, or message us on WhatsApp at +92 301 1111184 with your maker model and output target.

Kashif Ali

Tobacco Machinery Specialists, Karachi

The CEO of Civic Tobacco Machinery brings over 20 years of experience in the tobacco machinery industry, helping manufacturers find reliable equipment solutions. With a strong focus on technical expertise, quality, and customer satisfaction, he is committed to supporting businesses in meeting their production needs.

Not sure which machine you need?

Tell us your format, target output and budget. We will recommend the right machine, new or reconditioned, and help you get it running.